INEOS Styrolution · Terluran GP22 natur
Terluran GP22 is a general-purpose ABS and one of the most manageable materials in 3D printing. It post-processes, bonds, paints and acetone-smooths well – ideal for appearance models and housings.
Rated 1 to 5 relative to the other materials in our range. This is an experience-based orientation aid, not a measured value – the hard numbers are in the table below.
| Property | Value | Source |
|---|---|---|
| Material class | Acrylonitrile butadiene styrene (ABS) | grade designation |
| Density (ISO 1183) | 1.04 g/cm³ | INEOS Styrolution TDS |
| Tensile stress at yield (ISO 527, 23 °C) | 45 MPa | INEOS Styrolution TDS |
| Tensile modulus (ISO 527) | 2,300 MPa | INEOS Styrolution TDS |
| Nominal strain at break (ISO 527) | 10 % | INEOS Styrolution TDS |
| Charpy notched, 23 °C (ISO 179/1eA) | 22 kJ/m² | INEOS Styrolution TDS |
| Charpy unnotched, 23 °C (ISO 179/1eU) | 180 kJ/m² | INEOS Styrolution TDS |
| HDT A, 1.8 MPa (ISO 75) | 94 °C | INEOS Styrolution TDS |
| HDT B, 0.45 MPa (ISO 75) | 99 °C | INEOS Styrolution TDS |
| Water absorption, saturation (ISO 62) | 1 % | INEOS Styrolution TDS |
These values are taken from the manufacturer datasheet and apply to the material, not to the printed part. In 3D printing the achievable properties depend on part orientation, layer height and process parameters – in the Z direction in particular they are lower. Please talk to us before relying on them for design.
“Qualified for functional parts” is a general classification. A functional part can be a simple clip or a main load-bearing member – the forces and load cases differ fundamentally. We therefore always assess in each individual case whether a material is suitable for your part.
Source: INEOS Styrolution, TDS Terluran® GP22 · supplied by the manufacturer
Produced on: Bosch pellet printer — More about this machine
We are happy to advise on material selection and to review your part for manufacturability.
Send an enquiry
ZIKO